- CALL or TEXT (443) 747-1440
Pressure Test
If you suspect a leak, this is one way to verify it.
Pool losing water and you don't know where?
If you are losing water and there is no obvious sign of where it is going, a pressure test is good course of action.
We will isolate every possible line and put air in the line to determine if it holds the air, or the air leaks out.
If you plan to renovate your pool, you should always have a pressure test done. This way if there is a problem, pipes can be dug up and repaired or replaced entirely.
Frequently Asked Questions
We can't. Main drains can be tested with dye.
That is fine, we can always cap it off to stop losing water.
Most of the time, no. Pool plumbing usually 1.5" or 2" PVC plumbing and if the install team used 90° elbows, most camera heads can't make those turns. Sometimes we can use a metal snake or fish tape and push until it stops. Then we can use a metal detector to try and locate the end. A lot of variables effect this such as being under concrete or being too deep for the metal detector to detect. We give it our best try, but it's not easy.
We can try to remove it depending upon how far Batman traveled. More than likely, he will be stuck there until the chemicals breakdown his plastic body and he collapses under pressure.